Getting Started; Check The Memory Card; Installing The Dash Cam - Abask J05Pro Bedienungsanleitung

4.Getting Started

4.1 Check the Memory Card

Please insert the SD card in the correct direction. The SD
card will pop out after pressing it with a fingernail or sharp
object. (SD card is already inserted in the SD card slot)
To remove the memory card
Ensure that the dash cam is powered off,then push the
memory card until a click is heard and then release the card
to eject.
Note:
- Do not remove or insert the memory card while the dash
cam is turned on as this may damage the memory card or
corrupt the memory card's stored data.
- Please use a Class 10 or higher rated micro SD card with a
maximum capacity of 64GB.
- Please format the Micro SD card before the initial use.

4.2 Installing the Dash Cam

12