Sony alpha1 ILCE-1 Bedienungsanleitung Seite 70

Notes on the cable protector
Use the cable protector to prevent a cable from being disconnected when
shooting images with the cable connected.
To attach the cable protector
 Open the headphone terminal
cover, HDMI terminal cover, and
Multi/Micro USB terminal cover.
 Fit the hook of the cable
protector into the notch below
the USB Type-C terminal, and
attach it so that it covers the
terminal surface of the unit
while pressing down to keep it
from coming off.
 Push the attachment screw in
and turn it to secure the cable
protector.
 Insert the cable into one of the
jacks.
 Insert the cable into the holding
part and then secure the cable
with the fixing dial.
To remove the cable protector
Loosen the attachment screw, and then remove the cable protector.
GB
70
Hook
Attachment screw
Notch
Fixing dial