English
1. Disconnect the kebab knife from the power supply.
2. Set the adjustment plate to the maximum position, see chapter „4.2 Operation"
3. Bring the device into the maintenance position and loosen the cover using the quick-release screw.
Loosen the cover fastening screw
4. Insert the locking pin (included in the scope of delivery) into the hole in the blade and then turn the blade
until the locking pin sinks into the hole in the housing. Turning the blade should no longer be possible.
Remove the blade
5. Loosen the retaining washer by turning it counterclockwise. You can do this e.g. B. use a coin.
Insert the locking pin
23