UYAR S 120 plus EcoLine Bedienungsanleitung Seite 20

English
2. Set the adjustment plate to the maximum position in the direction of the arrow, see chapter „4.2 Operation"
3. Switch on the device by holding down the button or lever.
4. Use the grinding tool to sharpen from below with little force at an angle of approx. 20 ° (important!) the
beveled inside of the rotating blade. Continue this process until there is a minimal burr all around. Move the
grinding tool back and forth.
21
Adjust the adjustment plate
WARNING
There is a risk of cuts. Under no circumstances should you touch the
rotating blade.
Keep the knife out of the reach of children and pets!
WARNING
Flying sparks can occur when grinding with the sharpening tool. There is
a risk of injury to the eyes. Ensure that your eyes are adequately protected
by e.g. B. wear protective goggles!