Technical Specifications; Recycling; Delivery Set - Rondell Rde-1107 Betriebsanweisung

Malfunction Possible reason
The display shows a The water tank is installed
square-shaped running improperly
line. After you press the
Water does not get in the water
button «Exit» (22), the
supply pipe
drink is not poured in
the cup
The water supply pipe is blocked
The brewed coffee is too The grind is too fine
weak (watery)
Dark roasted coffee is used for
preparing drinks, which releases
more coffee oil, the grinder knives
become sticky, the beans do not
enter the coffee machine
Wet coffee has blocked the coffee
maker operation
Coffee is not poured into The water tank is installed
the cup improperly
The filter on the piston of the
brewing unit (12) is clogged
Water supply pipes for making
coffee are blocked
STORAGE
– Before taking the unit away for storage, unplug it and
let the unit cool down completely.
– Clean the unit.
– Do not leave, use and keep the unit in places with the
temperature below 0°C.
– Keep the unit in a dry cool place out of reach of chil-
dren and handicapped persons.
TRANSPORTATION
– Keep the original packaging of the coffee machine
for safe transportation.
– Remove all water from the coffee machine container
and its internal parts, wipe it dry with a soft cloth.

DELIVERY SET

Coffee Machine – 1 pc.
Milk supply tube – 1pc.
Stainless steel platform for heating cups – 1 pc.
Measuring spoon for coffee (for 5 g) – 1 pc.
Solution
Fill the water tank and place it in the socket behind the
coffee machine left door, press on it until bumping
Contact the service center
Contact the service center
Adjust the grinding by setting it to less fine grind
During the coffee maker operation turn the control
knob to the direction of «+». If the problem remains,
contact the service center.
Remove wet coffee beans, clean the coffee bean
container and add dry coffee beans
Fill the water tank and place it in the socket behind the
coffee machine left door, press on it until bumping
Clean the brewing unit following the guide, thoroughly
clean the filter on the brewing unit piston or apply to the
service center.
Perform the decalcination following this guide. If the
problem remains, contact the service center.
Metal brush for cleaning the milk supply system – 1 pc.
Soft brush for cleaning the brewing unit – 1 pc.
A set of spare silicone rings for the brewing unit – 1 pc.
Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50 Hz
Rated input power: 1100-1350 W
Water tank capacity: 1,6 L

RECYCLING

For environment protection do not throw out the unit
and the batteries (if included), do not discard the unit
and the batteries with usual household waste after the
service life expiration; apply to specialized centers for
further recycling.
20