Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BATTERY REMOVAL
• Ensure that the clipper is discharged of all power.
• Remove the 2 screws from the rear moulding of the clipper.
• Remove the screw from under the blanking plate. Carefully
force open the two case sections to expose the battery pack.
• Remove the battery pack diagonally (bottom left to bottom
right) from behind the switch board, twist whilst pulling to
break the wires.
TECHNICAL DATA
Charger input
Charger output
Protection class
Hair trimmer
RIGHT OF COMPLAINT
By law the product must be returned to the place of purchase
along with the original receipt in the event of a complaint.
The user is liable for any damage to the product that is caused by
not using the product for its intended purpose or by not following
this user manual correctly. The right of complaint will not apply
in these instances.
INFORMATION ABOUT HAZARDOUS WASTE
Used products should be handled separately from
household waste. They should be taken for recycling
in accordance with local rules for waste management.
100-240V, 50/60Hz, 0.3A
3.6VDC, 1.0A
2.4VDC, 1200mA
7
Werbung
Inhaltsverzeichnis
