Data Transfer; Application (App) - LaserLiner LaserRange-Master T4 Pro Bedienungsanleitung

Data transfer

This device has digital connectivity which allows wireless data transfer to
mobile devices such as smart phones or tablets with a wireless interface.
The system prerequisites for a digital connection are specified at
https://packd.li/ll/bl2/v2
This device can generate a wireless connection to devices which
are compatible with the wireless standard IEEE 802.15.4. The wireless
standard IEEE 802.15.4 is a transfer protocol for Wireless Personal Area
Networks (WPAN).
The range is set to a maximum distance of 10 m from the terminal
device and greatly depends on the ambient conditions such as the
thickness and composition of walls, sources of interference as well
as the transmit / receive properties of the terminal device.
Enable / disable Digital Connection:
1.
When enabled the Digital Connection symbol appears on the display.
When the function is active, a mobile device can connect by means of an
app to the measuring device.

Application (app)

An app is required to use the digital connection. You can download
the app from the corresponding stores for the specific type of terminal
device:
!
Make sure that the wireless interface of the mobile device is
activated.
After starting the app and activating the digital connection, a connection
can be set up between a mobile device and the measuring device.
If the app detects several active measuring devices, select the matching
device.
This measuring device can be connected automatically the next time
it is switched on.
LaserRange-Master T4 Pro
2.
17
EN