MALTEC DH-2200 Bedienungsanleitung Seite 8

FEATURES
The dehumidifier uses Peltier technology (no compressor), which makes it light and quiet.
It is perfect for small rooms. Poor ventilation causes musty odor and fungus in wardrobes,
larder, cabinet or storage room...etc. The mini dehumidifier eliminates this problem by
keeping them free of unwanted moisture.
To avoid electric shock. Do not open. There are no user serviceable parts inside.
Specifications are subject to change for improvement without prior notice.
CONNECTION AND SET UP
1. After removing the packaging materials, there should be 2 items:
Dehumidifier

AC Wire Cord

Use the dehumidifier at home:
1. To start to use your dehumidifier, first, put the dehumidifier on the flat place, connect
the AC input plug to the appropriate main socket. Then, touch the "ON/OFF" button
on the front face of the dehumidifier, the "ON/OFF" Blue LED will light, and the
dehumidifier will begin to operate. Listen and feel for the air blowing from two sides
dry air outlet. Touch the "ON/OFF" again, the dehumidifier will stop.
2. To using the air purifying function, first, turn on the dehumidifier in the first step, then
touch the "Air Purifying" button, the "Air Purifying " Blue LED will light, and the
two sides UV light will turn on, the purify function start to working. To touching the
"Air Purifying " button again, the purifying function will stop working.
3. To set the time, when the dehumidifier is working, you can touch the "Time Setting"
bottom to set the time from 1 hour to 24hours. Once the time over , the dehumidifier
will stop working automatically.
4. The dehumidifier have automatic defrost function, no need to defrost manually.
5. The indicator window will showing "Temperature""Humidity""Timer (if set)"
circularly.
The dehumidifier have auto-stop function. When the water tank is full, the
dehumidifier will auto-stop, and the red LED on the front of dehumidifier will turn on.
8/15