Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Einbauanleitung
1. Before installing the camera, check that it is complete
and working properly. Select the desired mounting
location. Place the camera at the future mounting
location and check if the viewing angle from this location
is suitable for you.
2. Once you have decided on the mounting location, start
the preparatory work. Before starting the mounting work,
wipe off dust and dirt from the mounting location.
3. Next, look in the area of the license plate and the
license plate light for an existing cable duct in the rear of
the vehicle or in the trunk lid. If there is no suitable hole for
the cable here, you will have to drill your own hole.
Werbung
