MS-7750 Manboard
Back Panel Quck Gude
Clear CMOS button
Mouse/
Keyboard
USB 2.0 Port
▶
Mouse/Keyboard
A combnaton PS/2
▶
USB 2.0 Port
The USB 2.0 port s for attachng USB 2.0 devces such as keyboard, mouse, or other
USB 2.0-compatble devces.
▶
Clear CMOS Button
There s CMOS RAM present on board that s powered by an external battery to store
system configuraton data. Usng CMOS RAM, the system can automatcally boot nto
the operatng system (OS) every tme t s turned on. If you wsh to clear the system
configuraton, press the button to clear the data.
Important
Please make sure that the system s powered off (G3 state), before clearng CMOS
•
data.
•
After clearng CMOS data, the system wll automatcally boot.
▶
Coaxal S/PDIF-Out
Ths S/PDIF (Sony & Phlps Dgtal Interconnect Format) connector s provded for
dgtal audo transmsson to external speakers through a coaxal cable.
▶
Optcal S/PDIF-Out
Ths S/PDIF (Sony & Phlps Dgtal Interconnect Format) connector s provded for
dgtal audo transmsson to external speakers through an optcal fiber cable.
▶
USB 3.0 Port
USB 3.0 port s backward-compatble wth USB 2.0 devces. It supports data transfer
rate up to 5 Gbt/s (SuperSpeed).
Important
In order to use USB 3.0 devces, you must connect to a USB 3.0 port. If a USB cable s
used, t must be USB 3.0 complant.
En-6
Coaxal
USB 2.0 Port
S/PDIF-Out
Optcal
HDMI Port
S/PDIF-Out
mouse/keyboard DIN connector for a PS/2
®
LAN
VGA Port
USB 3.0 Port
DVI-D Port
RS-Out
Lne-In
CS-Out
Lne-Out
Mc
SS-Out
mouse/keyboard.
®