hanseatic 32H450 Bedienungsanleitung Seite 39

Installation Menu Contents
Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations. Digital
Automatic channel
Cable: Searches and stores cable DVB stations. Analogue: Searches and stores analogue stations.
scan (Retune)
Satellite: Searches and stores satellite stations.
Manual Channel
This feature can be used for direct broadcast entry.
Scan
Network Channel Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial network
Scan channels. Digital Cable: Searches for cable network channels.
Analogue Fine
You can use this setting for fine tuning analogue channels. This feature is not available if no analogue
Tune
channels are stored.
Displays satellite settings. Satellite list: Displays available satellites. You can Add, Delete satellites or
Satellite Settings Edit satellite settings on the list. Antenna installation: You can change satellite anntenna settings and/
or start a satellite scan. SatcoDX: You can upload or download SatcoDX data using the related options.
Displays installation settings menu. Standby Mode Search(*) : Your TV will search for new or missing
channels while in standby. Any new found broadcasts will be shown. Dynamic Channel Update(*) :
Installation
If this option is set as Enabled, the changes on the broadcasts such as frequency, channel name,
Settings (Optional)
subtitle language etc., will be applied automatically while watching.
(*) Availability depends on model.
Using this menu, you can edit the main and backup home transponder parameters, including the
Setup Home Pid of the related M7 operator, which are used to download the channel list. Set your preferences
Transponder and press the Green button to save the settings. Then start an M7 operator installation using the
Automatic channel scan>Satellite menu.
Use this setting to clear channels stored. This setting is visible only when the Country option is set
Clear Service List
to Denmark, Sweden, Norway or Finland.
Select Active This setting allows you to select only the broadcasts within the selected network to be listed in the
Network channel list. This feature is available only for the country option of Norway.
You can use this menu item to monitor signal related informations such as signal level/quality, network
Signal Information
name etc for available frequencies.
First Time
Deletes all stored channels and settings, resets TV to factory settings.
Installation
English - 15 -