Introduction - STEPCRAFT D Serie Erste Schritte

9 Your First Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
9.1 Choosing the Workpiece Material ................................................................................................... 49
9.2 Fixating the Workpiece ................................................................................................................. 49
9.3 Importing a File ........................................................................................................................... 51
9.4 Testing the Program ..................................................................................................................... 51
9.5 Preparing the Milling Motor and the Insertion Tool .......................................................................... 51
9.6 Defining the Workpiece Zero Point ................................................................................................. 52
9.7 Switching on the Milling Motor ...................................................................................................... 52
9.8 Starting the Job ........................................................................................................................... 52
The contents of these operating instructions are the intellectual property of the STEPCRAFT GmbH & Co. KG.
Forwarding or copying (also in excerpts) is not allowed without our explicit and written authorization. Any infringements
are prosecuted.

Introduction

This manual is intended to familiarize you with your CNC system. This Getting Started Guide applies equally to the STEP-
CRAFT CNC systems of the D and M series for all machine sizes in each case.
You can order products and accessories from our online shops:
COPYRIGHT
Shop EU and Rest of World
https://shop.stepcraft-systems.com/
Shop USA
https://www.stepcraft.us/
29