Cleaning - Dostmann Electronic Rld 380 Bedienungsanleitung

(1) Remove cone cap cover from the tip of snake tube.
(2) Pull out old sensor and insert the new sensor into
the plug ( see below fig.2).
(3) Seal the cap cover over the plug.
Fig.2

9. CLEANING:

The Instrument plastic housing can be cleaned with
standard household detergent or isopropyl alcohol.
Care should be taken to prevent the cleaner from
entering the instrument. Gasoline and other solvents
may damage the plastic and should be avoided.
WARNING!
The detergent or isopropyl alcohol might
damage the sensor, please keep then from
the sensor through the process.
Sensor protector
Sensor
25
Refrigerant Leak Detector