Herunterladen Inhalt Inhalt Diese Seite drucken

Warranty Conditions; Before The Installation - Schartec Tube F 20-60 Einbau- Und Betriebsanleitung

Rollladenmotor
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Warranty
We are exempt from warranty and product liability if own structural changes are made or improper installations are carried out or arranged against our
specified installation guidelines without our prior consent. Furthermore, we do not accept any responsibility for the accidental or careless operation
of the motor as well as for the improper maintenance of the motor and the accessories as well as for the improper maintenance of the roller shutter.
Batteries are also excluded from warranty claims.
Warranty Duration
In addition to the dealer's statutory warranty under the purchase agreement, we provide the following Warranty from the date of purchase:
• 5 years
• 2 years on radio receviers/transmitters and accessories
Claiming the warranty does not extend the warranty period. For replacement deliveries and repair work, the warranty period is six months, but not less
than the current warranty period.
Requirements
The warranty claim is only valid for the country in which the device was purchased. The goods must have been purchased through the sales channel
specified by us. The warranty claim is only valid for damage to the subject matter of the contract itself. Reimbursement of expenses for removal and
installation, inspection of corresponding parts, as well as claims for lost profit and damages are excluded from the warranty. The proof of purchase is
valid as evidence for your warranty claim.
Performance
For the duration of the warranty, we will remedy all defects in the product that are demonstrably due to a material or manufacturing defect. or man-
ufacturing defect. We undertake, at our discretion, to replace the defective goods free of charge goods free of charge against defect-free, repair or
replace a reduced value. Excluded are damages due to:
• Improper installation and connection
• Improper commissioning and operation
• External influences such as fire, water, abnormal environmental conditions
• Mechanical damage due to accident, fall or impact
• Negligent or wilful destruction
• Normal wear and tear or lack of maintenance
• Repair by unqualified persons
• Use of parts of foreign origin
• Removal or obscuring of the serial number
• Replaced parts become property of the manufacturer
1. Read these instructions carefully before installation.
2. Make sure the shutter is free of damage and opens and closes smoothly. If necessary, replace damaged components.
3. Check the installation position of the motor in the shutter box by lowering the shutter completely and checking whether the motor is to be installed
on the left or right side of the shutter box. Always choose the shortest route to the nearest junction box, as electrical wiring must not be routed inside
the shutter box.
4. Always make sure that the motor can be completely inserted into the shaft as far as it will go.
Caution!

Warranty Conditions

Before the Installation

Installation
= NOT PERMITTED!
11

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Schartec Tube F 20-60

Inhaltsverzeichnis