Important Safety Information - tecatlantis EASY LED UNIVERSAL 2.0 Bedienungsanleitung

GARANTIE
Le système d'éclairage EASY LED UNIVERSAL 2.0 est garanti 3 ans à partir de la
date d'achat pour tout défaut éventuel des matériaux ou de collage. Les domma-
ges consécutifs à un choc, une chute ou à l'utilisation d'un mauvais support
seront exclus et entraîneront l'annulation de la garantie. En cas d'ouverture ou
de tentative d'ouverture du luminaire, la garantie sera annulée. Le non-fonc-
tionnement de moins de 5% du nombre total des LED n'est pas considéré comme
défectueux. La garantie couvre seulement la réparation ou remplacement du
produit, excluant toutes demandes de dommages qui en résultent. Les éventuels
frais d'expédition de l'article défectueux sont à la charge du destinataire.
Dans le cas où le droit de garantie s'applique, joindre le ticket d'achat au produit dé-
fectueux. Les EASY LED UNIVERSAL 2.0 Tecatlantis ne contiennent pas de mercure.
Produit fabriqué au Portugal.
ENGLISH
Thank you for buying this product.
LED lighting system with 2 independent light channels that used with the LUMI-
NUS – SMART LED CONTROLLER allows simulating the different times of the day.
This new version of light units with universal system (adjust to any aquarium in
the market) is available for freshwater, saltwater, saltwater with intense blue
spectrum and saltwater with 100% blue light. Produced with anti-corrosion
aluminium structure for better heat dissipation.
For more information, visit our website www.aquatlantis.com
ADVANTAGES
- Fit in T5 and T8 lamp supports.
- The LED lighting has low energy consumption, saving up to 50% energy.
- Long lasting LED lamps.
- Low voltage, ensuring a high level of safety.
- IP X8 Index.
- Wide beam angle for an optimized distribution of light in the aquarium.
- 80 C.R.I. - High colour rendering index, in order to ensure a perfect habitat
for your fish.
INSTALLATION GUIDE
8
Make sure that all the parts of the product are in good condition when removed
from the package and before any installation.
EN
- USING THE T8/T5 LAMP HOLDERS
(See image A)
Disconnect the T5/T8 lighting system from the socket before the installation. Do
not turn it on while the EASY LED UNIVERSAL 2.0 is operating. Remove the T5/T8
tubes from the pre-existing lighting system of your tank. If it is a T5 light unit, fit
the EASY LED UNIVERSAL 2.0 directly on the lamp holders and screw them. If it
is a T8 light unit, put the T8 adaptors on the ends of the EASY LED UNIVERSAL 2.0
and screw the T8 lamp holders. Connect the plug in the socket. It's ready to work.
- EXTENDABLE AND ADJUSTABLE BRACKETS
(See image B)
Fit the plastic end cap on the lamp. Attach and regulate the metal brackets
according with the length of the aquarium. Place the lighting system so that the
curved ends of the extendable brackets remain outside the aquarium. Connect
the plug in the socket. It is ready to work.
- STAINLESS STEEL CABLE KIT
(See image C)
To suspend the lamp, unscrew the unit 1 and fasten it in the ceiling with a screw.
Screw back the unit 2 in the unit 1 (see image). Fasten the unit 3 in the plastic
cap, as shown in the image C. Adjust the height of the lamp with the unit 3.
Stainless steel cable Kit not included (code 10840)
ATTENTION!
This luminaire only operates with the power adaptor supplied
or recommended by the manufacturer. The use of an inadequate adaptor may
result in an unsafe condition for the user.

IMPORTANT SAFETY INFORMATION

WARNING!
Please read carefully! Avoid accidents that can damage the product
or harm the user. Ensure the good operation of this equipment!
LED lighting units ready to be used. DO NOT disassemble and use for other
purposes than the indicated.
- Do not operate if any part has a damaged cable or plug, is malfunctioning, has
been dropped or damaged in any way.
- The external flexible cable or cord of this luminaire cannot be replaced; if the
cord is damaged, the luminaire shall be destroyed.
- The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.
- Do not cover the light unit in danger of overheating.
- Do not keep the equipment under adverse weather conditions (- 0ºC). Low tempe-