of the screws, fastening bolts and nuts, etc. are properly tightened and secured
•
Do not add items to the product that may endanger its proper functioning or objects
that could pose a threat to the child
•
If any damaged parts have been found, immediately stop using the product
and place it out of the child's reach until the kick scooter is repaired
•
Do not use the product in any other way than stated in the manual
•
Do not use the kick scooter on roads with traffic, or any other roads with motorized
vehicle travel and in places posing a threat to the health and life of the child. Do not use
the kick scooter on slopes, in proximity to swimming pools, on stairs, etc.
•
Do not use the product on wet, slippery, sandy, gravelly, etc. surfaces that may
create the risk of the child losing balance
•
Do not use the product after dark, in foggy conditions or in any other weather
conditions that limit visibility
•
Before using the product, make sure that the child understands how to use the
product correctly, including how to turn and how to stop the kick scooter
•
Do not leave the product exposed to weather conditions such as rain, snow or high
temperatures
•
The product should be assembled by an adult
SPECIFICATIONS
•
Age Range: 3+ years old
•
Suitable for children 90–135 cm tall
•
Maximum load up to 25 kg
•
3-level handlebar height adjustment
•
Built-in rear brake
PRODUCT COMPONENTS (see page 3)
1
Steering
2
Handlebar height adjustment clamp
3
Handlebar
4
Handlebar lock push buttons
HANDLEBAR ASSEMBLY
1
To install the handlebar, push the handlebar into the handlebar opening until it locks. The
lock will "click" and the push buttons to unlock and remove the handlebar will appear on
the external side of the opening (Fig. 1.2).
NOTE: Make sure that the lock is active, and the handlebar feels secure in the opening.
•
Steering by body balancing
•
Front steered wheels and rear LED
wheels
•
Product weight: 2.18 kg
5
Front wheels
6
Brake
7
Rear wheel
9