ECTIVE BM 50 Bedienungsanleitung Seite 22

20 ECTIVE BM
• FULL U (full voltage): When the voltage is higher than this
value, it will be displayed as 100%
• ZERO U (zero voltage): When the voltage is lower than this
value, it will be displayed as 0% and the display's backlight
will turn off If the battery continues to discharge, the
display will start flashing and show an an alarm indicator,
accompanied by an acousitic warning
• Alarm: when the battery's capacity drops below this value,
the disply will start flashing, accompanied by an acoustic
warning
Note: For typical use cases, you don't need to change the FULL
U and ZERO U values, which are set to a default of 0V If you
want to change these values, please first make sure you know
the actual charge and discharge voltage of your battery
3 Select „CAP" and press the „OK" button to enter the preset
capactity settings The selected item will flash Press the „OK"
button to cycle through items Use the
increase or decrease the value Finally, press the
exit the preset capacity settings
4 You can change other settings the in the same way as the
preset capacity Finally, press the
values and exit the settings menu
Setting capacity to zero or to full:
Before first using the battery monitor or when connecting it to
a different battery, the „zero" and „full" capacity values need
and buttons to
button to save the new
button to