Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Function/Justierung Thermostat; Safety Function/Thermostat Setting; Safety Function/Réglage Du Thermostat - PHARO Comfort Plus M20 2634 Serie Montageanleitung

Inhaltsverzeichnis

Werbung

Safety Function / Justierung Thermostat
Safety Function / Thermostat Setting
Safety Function / Réglage du thermostat
Safety Function
Dank der Safety Function lässt sich die gewünschte Höchsttemperatur von z. B. max. 42° C voreinstellen.
The desired maximum temperature for example max. 42° C can be pre-set thanks to the safety function.
Grâce à la fonction Safety, il est possible de prérégler la température maximale par exemple max. 42° C souhaitée.
1
SW 3 mm

Justierung Thermostat / Thermostat Setting / Réglage du thermostat
1

SW 3 mm
26
2
6
2
1 Triostatplusgriff in Stellung "Handbrause" drehen.
Set Triostatplus handle to handshower.
Placer la poignée Triostatplus sur la position „douchette manuelle".
2 Am Thermostatgriff den Thermostat auf 38 °C justieren.
Adjust thermostat to 38°C with the thermostatic knob.
Régler le thermostat sur 38°C.
3 Triostatplusgriff in Stellung "0" drehen. Griff demontieren.
Set Triostatplus handle to position "0". Remove the handle.
Placer la poignée Triostat-plus sur la position „0". Démonter la poignée.
4 Thermostatgriff auf 38 °C Anschlag drehen.
Set the thermostatic knob to the 38 °C safety stop.
Tourner la poignée thermostatique jusqu'au cran d'arrêt 38°C
5 Griff aufstecken, senkrecht ausrichten und festschrauben.
Push handle on, align vertically and screw tight.
Monter la poignée thermostatique, l'ajuster verticalement et la visser.
3

3
SW 3 mm
4

SW 3 mm
4

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis