Troubleshooting - Titanium 152Xm Bedienungsanleitung

12. Troubleshooting

If there is a problem with your shredder, check below for the
symptoms and steps to resolve. If you continue to have problems,
contact customer support at our Service Center.
DO NOT ATTEMPT TO REPAIR BY OPENING THE SHREDDER HEAD.
This will completely void the product warranty.
No-power to the shredder
1
2
Shredder does not feed or shred paper
Overheat
45
Min
Cool down
Make sure power cord is plugged
1
into a functioning 230-V standard
house- hold power outlet.
2
Check if the blue Power On icon is lit.
3
Check that the lid and waste bin
are properly closed.
If Overheat light is lit in red, turn
1
shredder off and let it cool down
for 45 min - utes. Turn shredder on,
check Overheat light again, and
restart shredding only when light is
not lit. Check main power switch
located at back of machine
152XM
35