Installation; Operation; Main Power Switch; Control Panel - Titanium 152Xm Bedienungsanleitung

6. Installation

1. Make sure basket door is shut and securely closed. The safety power
cut off will not operate if door is open. Shredders with pull-out
wastebaskets will also cut power upon bin removal. The supplied
wastebasket activates a safety switch, which allows the shredder to
be operable.
2. The socket-outlet should be near the equipment and easily accessed.
3. Connect the power cord to any standard 230-V AC outlet.

7. Operation

ON
OFF

Control panel

Auto-On (blue)
This setting automatically starts the shredder by loading
paper into the paper tray or inserting paper into the manual-
feed slot. When the paper has passed through, the shredder
automatically stops.
Off
This setting turns off all features of the shredder. For safety
reasons, we recom- mend that you leave shredder in the OFF
position when it is unattended or not in use.
Reverse
In the unlikely event of a paper jam, use the reverse setting
to help clear the cutters of paper that did not pass through.
IMPORTANT: Never attempt to clear a jam using the
reverse function until you have emptied the wastebasket.
28
Main Power Switch (at back of machine)
The Main Power Switch must be "ON" to operate. In an
emer- gency, stop the shredder immediately and turn
switch to "OFF" mode. This completely disconnects all
power to the machine.
152XM