Techincal Data; Maintenance - Titanium 152Xm Bedienungsanleitung

Overfeeding the shredder: Shredding beyond the specified sheet
capacity can result in extensive damage to the shredder. Overfeeding
will strain the machine and quickly wear and break the cutting blades
and internal components.
Overheating with extended use: In the event that machine shreds
continuously beyond the maximum running time and overheats, the
unit will automatically shut off. If this happens, switch the shredder off
for 45 minutes or longer before resuming normal operation.
8. Technical Data
Sheet capacity:
Paper shred size:
Paper tray size:
Paper entry width:
Credit card capacity:
Duty cicle:

9. Maintenance

Oiling procedure with shredder oil (not included)
Open lid.
1
Carefully apply shredder oil across feed slot.
2
3
Close lid and turn on shredder in reverse mode for 3-5".
32
Auto feed tray
180 sheets
4,00mm x 12mm pieces
A4
220mm
N/A
60 min. on / 45 min. off
Failure to properly maintain your shredder
will void the warranty.
152XM
Manual feed slot
10 sheets
4,00mm x 12mm pieces
N/A
220mm
Only one per pass
10 min. on / 45 min. off