Barracuda Secure Connector Kurzanleitung Seite 6

4
Provision
• Copy the sca.conf file to the Secure Connector.
• Unplug the Secure Connector from your PC and remove the USB cable from the
OTG port.
• Reboot the Secure Connector by pressing the PWR button for 5 seconds.
5
Connect WAN and LAN
• Connect the WAN port of the Secure Connector to the Internet.
• Connect the LAN port of the Secure Connector to the network/device.
Internet
3 Setup / Support
Secure Connector
Corporate LAN