How To Use - Tesvor S6 Smart Robot Vacuum Water tank Benutzerhandbuch

How to use

NOTE:
Please remove the water tank when charging to avoid danger.
•
Mopping is not suitable for carpets. When mopping, please roll up the edges of
•
carpets or use magnetic strips to isolate carpets.
If there is any abnormality in the robot, please try to turn off the power switch on
•
the right side of the robot to restart it when not charging.
1) Open the sealing plug of the water tank, and slowly pour water into it.
2) Close the sealing plug of the water tank, paste the cleaning cloth to Velcro on the
bottom of the tank.
3) Press the button at the rear of the robot to take out the dust box and install the water
tank.
4) Click Plan Cleaning on the remote control or Smart Clean on the app.