Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ERLÄUTERUNG DER SYMBOLE
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Use ear protection. Exposure to loud noise
may result in hearing loss.
Wear protective goggles.
Wear protective gloves.
Wear foot protection.
ATTENTION! Electric shock warning!
ATTENTION! Rotating parts, entanglement
hazard!
Class II protection device with double
insulation.
While operating, do not expose the machine
to rain and do not leave it outside.
Do not bring hands or feet close to the
rotating machine parts and do not put hands
or feet under the rotating machine parts.
CAUTION! There is the risk of ejection of
objects from the machine!
CAUTION! Maintain a safe distance from
nearby bystanders!
CAUTION! In case of damage to the power
cord or plug, immediately switch off the
power supply!
Before servicing and maintenance or when
the machine is not in use, always unplug the
machine from the power supply.
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
The terms „device" or „product" are used in the warnings
and instructions to refer to ELECTRIC SCARIFIER AND
AERATOR.
ELECTRICAL SAFETY
a)
The plug must fit the socket. Do not modify the plug
in any way. Using original plugs and matching sockets
reduces the risk of electric shock.
b)
Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an increased
risk of electric shock if the earthed device is exposed
to rain, comes into direct contact with a wet surface
or is operating in a damp environment. Water getting
into the device increases the risk of damage to the
device and of electric shock.
c)
Do not touch the device with wet or damp hands.
6
EN
U S E R M A N U A L
d)
Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e)
If working with the device outdoors, make sure to use
an extension cord suitable for outdoor use. Using an
extension cord suitable for outdoor use reduces the
risk of electric shock.
f)
If using the device in a damp environment cannot be
avoided, a residual current device (RCD) should be
applied. The use of an RCD reduces the risk of electric
shock.
g)
Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer's service centre.
h)
To avoid electric shock, do not immerse the cord, plug
or device in water or other liquids. Do not use the
device on wet surfaces.
i)
ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.
j)
Do not use in very humid environments or in the
direct vicinity of water tanks.
k)
Prevent the device from getting wet. Risk of electric
shock!
l)
During operation, be careful to keep the moving parts
of the machine away from the extension cord because
their contact may damage the extension cord and
cause an electric shock.
SAFETY IN THE WORKPLACE
a)
Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b)
If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
c)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
d)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
e)
In case of fire, use a powder or carbon dioxide
(CO
) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
f)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
g)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
h)
Please keep this manual available for future reference.
If this device is passed on to a third party, the manual
must be passed on with it.
i)
Keep packaging elements and small assembly parts in
a place not available to children.
j)
Keep the device away from children and animals.
k)
Using the device in dangerous areas and in the areas
of explosive atmosphere is prohibited.
l)
Avoid using the machine in bad weather conditions,
especially during lightning storms or if there is a risk
of a lightning storm.
m)
When operating, the machine ejects material that
comes into contact with the blades, such as stones,
hard pieces of clay, twigs etc. Care should be taken
not to injure bystanders
21.12.2020
REMEMBER! When using the device, protect
children and other bystanders.
PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instruction on how to operate the device.
c)
The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
d)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
e)
Use personal protective equipment as required
for working with the device, specified in section 1
(Legend). The use of correct and approved personal
protective equipment reduces the risk of injury.
f)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
g)
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
h)
Remove all adjusting tools or spanners before turning
the device on. A tool or spanner left in the revolving
part of the device may cause injury.
i)
The device is not a toy. Children must be supervised to
ensure that they do not play with the device.
j)
When working with the machine, wear proper
footwear and long trousers. Any use of the machine
barefoot or wearing open shoes is forbidden.
k)
Always make sure that the machine ventilation
openings are free from dirt (e.g. stones, grass,
branches, leaves)
l)
Running with the machine is forbidden. The machine
must be operated at walking speed.
SAFE DEVICE USE
a)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
b)
Make sure the plug is disconnected from the socket
before
attempting
any
adjustments,
accessory
replacements or before putting the device aside.
Such precautions will reduce the risk of accidentally
activating the device.
c)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
d)
Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
21.12.2020
EN
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
g)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
h)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country where
the device will be used.
i)
Avoid situations where the device stops working
during use due to excessive loading. This may result in
overheating of the drive elements and damage to the
device.
j)
Do not touch articulated parts or accessories unless
the device has been disconnected from the power
source.
k)
The device is not a toy. Cleaning and maintenance may
not be carried out by children without supervision by
an adult person.
l)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
m)
Keep the device away from sources of fire and heat.
n)
Do not overload the device.
o)
Do not cover the ventilation openings!
p)
Always keep your hands, feet and other parts of
the body away from the cutting elements, specially
during the engine start.
q)
The blades continue to rotate due to the power of
inertia for a few seconds after switching the machine
off.
r)
Always make sure that there are no metal objects
or other elements in the work area that could be
ejected by the cutting elements and cause damage to
property or personal injury.
s)
Unplug the machine from the power supply:
•
before passing the machine to another user,
•
before leaving the machine without supervision
(even for a short time),
•
before removing blockages from any part of the
machine,
•
before carrying out any technical inspections,
repairs, cleaning or performing any maintenance
operations.
t)
If the machine emits abnormal noises or reaches
abnormal vibration levels, immediately switch off the
machine, unplug it from the wall socket and search
for the cause of the problem. Excessive vibration may
damage the machine and injure the user.
u)
Do not operate the machine on excessively steep,
sloping surfaces.
v)
When operating the machine on an inclined surface,
always move diagonally across the slope, never move
in the top-bottom direction.
w)
Take special care when changing the direction of
movement when operating the machine on slopes.
x)
Take special care when reversing the machine or
pulling it towards yourself.
y)
If you stop using the machine and want to leave the
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
7
Werbung
Inhaltsverzeichnis
