CR Rpanel-SL-18W Bedienungsanleitung Seite 7

Long Screws
Step
Ⅲ: Fix the panel light with supplied long
screws to the wall/ceiling, check stability.
2. Install with the bracket
Suitable for Recessed Embedded Box
Mounting Bracket
StepⅠ: Fix the bracket to the embedded box in
wall/ceiling with washer screws. And run the
main power line out.
Short Screws
Step
Ⅲ: Fix the panel light onto the bracket with
short screws, check stability.
Step Ⅳ: wedge the rubber plugs into the two screw
holes of ceiling light.
Washer Screws
Step Ⅳ: wedge the rubber plugs into the two screw
holes of ceiling light.
5
Rubber Plugs
StepⅡ: Connect the "L" "N" and Earth wire
with terminal connectors. Check fixed tightly.
Tuck all wires carefully into embedded box.
Ensure no wires are pinched. (Please don't pass
the wires out of the middle of the bracket, it will
unable to install flatly.)
Rubber Plugs
LED Panel Light Series
Terminal
Connectors