Charging The Product; Switching On The Product - nedis HPBT1202BK Kurzanleitung

• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a damaged
or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for maintenance
to reduce the risk of electric shock.
• Do not expose the product to water or moisture.
• Using headphones with both ears covered while participating in traffic is
discouraged and may be illegal in some areas.
• The product is delivered with a partially charged battery. For optimal battery
life, fully charge the battery before first use.
• Some wireless products may interfere with implantable medical devices and
other medical equipment, such as pacemakers, cochlear implants and
hearing aids. Consult the manufacturer of your medical equipment for more
information.
• Do not use the product at locations where the use of wireless devices is
prohibited due to potential interference with other electronic devices, which
may cause safety hazards.
• Only use the provided USB charging cable.
• Do not leave the product on prolonged charge when not in use.
• This product is equipped with a non-removable internal battery. Do not
attempt to replace the battery yourself.
• During charging, the battery must be placed in a well-ventilated area.
• The charger must only be plugged into an earthed socket-outlet.
• Only power the product with the voltage corresponding to the markings on
the product.
• Children of less than 8 years should be kept away.

Charging the product

Plug the micro USB cable A

Switching on the product

Press and hold the on/off / play / pause button A
the product.
Pairing the headphones to a Bluetooth® audio source
1. Switch on the product to activate pairing mode.
into the micro USB port A
2
6
.
q
4 for 2 seconds to switch on