Switching On The Product; Making Phone Calls - nedis HPBT5054BK Kurzanleitung

•
Do not short circuit.
•
Do not repair the product. If damaged, it must be properly
disposed of.
•
Only use the product as described in this manual.
Pairing the earphones to a Bluetooth audio
source
1. Take the earphones out of the charging case. The earphones
switch on automatically.
4 Tap and hold both earphone touch controls A
seconds to manually switch on the earphones.
2. The status indicator LED A
pairing mode is active.
3. Enable Bluetooth on the device you want to pair the
earphones with.
4. Select "HPBT5054BK" from the list of available Bluetooth
devices on your device.
Charging the product (image B)
1. Plug the USB-C cable A
charging case.
2. The charging indicator LED A
progress of the battery.
3. Place the earphones into the respective slots A
close the lid A
4
The earphones and the charging case can charge
simultaneously.

Switching on the product

• Tap and hold A
product on or off.
• Tap and hold A
switch off the product.

Making phone calls

With the earphones connected to a mobile phone via
Bluetooth, phone calls will automatically be redirected to the
earphones.
• To answer an incoming call, tap A
• To reject an incoming call, tap and hold A
seconds.
• To end a call, tap A
Controlling the music
5
• Tap A or A
• Double tap A
• Double tap A
4
q
into the USB-C port A
1
to charge the earphones.
5 7
and A
5 7
and A
5 7
or A
7
to play or pause the music.
5
to skip to the previous track.
7
to skip to the next track.
starts blinking to indicate
3
indicates the charging
for 2 seconds to switch the
for 4 seconds to manually
5 7
or A
5
.
6
5 7
A
for 2
9
of the
2 8
A
and
.
7
or A
for 1.5