GLO HYPER X2 Gebrauchsanleitung Seite 32

Instructions for use
61
01 Charge
Insert the USB cable into the USB charging port of the
glo™ tobacco heater and connect with a suitable USB
port or USB AC adaptor. The lights on the LED ring
display will indicate the charging status.
Charging Status
EN
The glo™ tobacco heater may take up to 3.5 hours to
be fully charged at ambient temperature.
The glo™ tobacco heater can be used whilst plugged
in as long as it has enough charge. However, charging
will be paused until the session is complete. If the
device is used whilst charging, allow the device to
cool for a minimum of 90 seconds between sessions.
Up to 25% charged
Up to 50% charged
Up to 75% charged
Up to 95% charged
100% charged
02 Insert a neo™ stick
Open the shutter door by rotating the collar at the top
of the device, to the open position and gently insert a
neo™ stick until you feel the stick touching the bottom
of the glo™ tobacco heater. At this point you should
still see the top of the coloured collar on the tipping of
the neo™ stick.
Normal demi slim cigarettes will not work with the
glo™ tobacco heater. Please only use neo™ sticks.
62
EN