Yealink SIP-T43U Schnellstartanleitung Seite 6

E
N
G
3. Connect the USB flash drive, as shown below:
L
I
S
H
Note: The USB ports can also be used to connect other USB devices, such as EXP43, USB headset and so on.
Yealink recommends that you connect Bluetooth USB dongle or Wi-Fi USB dongle to the upper USB port, and connect
EXP43 to the lower USB port.
4. Connect the network and power, as shown below:
You have two options for network and power connections. Your system administrator will advise you which one to use.
Note: The IP phone should be used with Yealink original power adapter (5V/1.2A) only. The use of the third-party power
adapter may cause the damage to the phone. If you are connecting a PC to your phone, we recommend that you
use the Ethernet cable provided by Yealink.
Startup
If inline power (PoE) is provided, you don't need to connect the power adapter. Make sure the hub/switch is
PoE-compliant.
Startup
After the IP phone is connected to network and supplied with power,
it automatically begins the initialization process. After startup, the
phone is ready for use. You can configure the phone via web user
interface or phone user interface
2
a. Upper USB Port
A
AC Power Option
B
PoE ( Power over
Ethernet ) Option
.
b. Lower USB Port
PC Connection
Power Adapter
(Optional)
(DC 5V)
PC
PC Internet
PC Internet
PC
PC Connection
(Optional)
IEEE 802.3af compliant
Welcome
Initializing...please wait
PoE Hub/Switch