Introduction; Product Features - Omnitronic LH-089 Bedienungsanleitung

Contents
1 Introduction ..................................... 7
Product features ............................... 7
2 Safety Instructions ......................... 8
3 Elements and Connections ........... 9
4 Setup and Operation ...................... 10
Inserting/replacing batteries ............. 10
Testing cables................................... 10
Testing long and preinstalled cables 10
Reading the LED indicators .............. 11
Continuity tester ................................ 11
Using test tones ................................ 11
5 Technical Specifications ................ 11
No. 10355084, Publ. 23/03/2017
D00107730, version 1.0
For product updates, documentation, software
and support please visit www.omnitronic.de.
You can find the latest version of this user
manual in the product's download section.
© 2017 OMNITRONIC. All rights reserved.
No part of this document may be reproduced in
any form without the written permission of the
copyright owner. The contents of this document
are subject to revision without notice due to
continued progress in methodology, design,
and manufacturing.
All trademarks mentioned herein are the
property of their respective owners.

1 Introduction

Thank you for purchasing the LH-089 cable tester. The
LH-089 is designed for testing a large variety of standard
audio and data cables with ease. It is an indispensable
helper for musicians, sound and stage technicians. Each
pin of the connected cable is individually tested and the
assignment is shown on a clearly arranged LED display.
The continuity tester with visual and acoustic signals
facilitates testing of all other types of connections. In
addition, a test tone generator is integrated. To test long
cables installed through walls or ceilings can be tested, the
chassis can be split into a transmitter and receiver part.

Product features

• Multi-format cable tester consisting of sender and receiver
module
• Indispensable helper for musicians, sound and stage
technicians
• Split chassis design allows testing long cables installed
through walls or ceilings
• Tests: XLR M/F (3-pin/5-pin), 3.5 mm jack, 6.3 mm jack,
DIN (3-pin/5-pin), RCA, Speaker (4-pin), RJ45, RJ11,
BNC, banana connectors
• Continuity test via supplied test leads (2)
• Audible and visible signal indication
• Three test speeds (fast/medium/slow)
• Test tone generator with adjustable amplitude (+0/-10/-50 dB)
• Rugged metal housing for stage use
• Operation via 2 x 9 V battery (not included)
7 • EN