Power supply
· The refrigerator must be connected to a properly earthed socket in line
with relevant valid country regulations before operating;
· Check the data label (which is on the side of the refrigerator) for voltage
and frequency corresponds to your local one; If not, don't plug your
cable into the socket;
WARNING: To avoid a hazard due to instability of the appliance, it
must be fixed in accordance with the instruction.
· Installation instructions
When install, ventilation should be considered seriously, please refer to
the following:
· There should be left at least 200 cm³ for ventilation
· The distance between wall and refrigerator side should be at least
20mm
· The bottom should be left at least 50mm for air flowing air passing
through must not be preheated
· Entire cooling system should be considered in the ventilation
· The following four pictures show four installation ways: