Hamron 023629 Bedienungsanleitung Seite 32

EN
PRESETTING AIR PRESSURE
Tap to increase (+) and reduce (–) to fine adjust the air pressure.
Press and hold increase (+) and reduce (–) to quickly change the
air pressure.
NOTE:
The set run mode and air pressure are saved automatically in
the product memory. The run mode only needs to be set if it is
to be changed from previous use. If such a change is made the
standard pressure for the new run mode is set automatically.
CONNECTION OF AIR HOSE
Connect the hose as shown in the figure.
1. Schrader valve
2. Presta valve
3. Ball needle nozzle
FIG.
PUMPING – START
Tap the power switch button to start pumping. The increase in the
air pressure is shown in the pressure gauge display in real time
during the pumping. The product makes a noise when in use and
its hose and air connections get hot.
Avoid touching the air hose and hose connection – risk of burn
injury.
32
5