Amewi HYPER GO Bedienungsanleitung Seite 16

As soon as charging is complete, the LED lights up continuously.
•
Immediately remove the battery from the charging cable as soon as charging is complete.
•
The information on charging time is based on a 5V 2A mains adapter. If you use a different power supply, the charging time will vary. We
recommend a power supply unit with 5V 2A output power.
Richten Sie die 4 Löcher der Karosserie mit den Haltern aus und drücken Sie sie dann nach unten.
Align the 4 holes of the car shell with holders, then install it.
KAROSSERIE BEFESTIGEN / INSTALL THE BODY
BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL HYPER GO TRUGGY
16