7-4
Replacing the Rear Glass
1.
Remove the upper rear maintenance door from the Target Cabinet.
2.
Remove 4off pozi flange head screws (M5x12) and remove the Chip Slope (L).
3.
Remove 4off pozi flange head screws (M5x12) and remove the Chip Slope (R).
4.
Remove the 4off Button head screws (M5x35) and remove the window plates.
Pozi flange screws
(M5x12)
Rear Glass
Chip Slope (R)
5.
Remove the glass in the direction of the arrow in the diagram below.
Rear Glass
6.
Reassemble in reverse order.
Light Guard
Launcher Assy
Page 55
Button head screw
(M5x35)
Window Plate
Button head screw
(M5x35)
Chip Slope (L)