Technical Specifications; Decommissioning; Storage; Disposal - Ingun MA 2 Serie Betriebsanleitung

8)

Technical specifications

Basic unit:
Contacting stroke:
Contact force:
Contact force with automatic opener/closer
(FB-OSA-MAxxxx):
Spring-loaded test probe installation height in stand-
ard model
Length of pushrods in standard model
Exchangeable kit centring accuracy (probe plate unit
to pressure frame unit)
Permissible test voltage
Ambient temperature for applications
Operating pressure for pneumatic functional units
Case protection class versus access by dangerous
live parts
RoHS conformity
9)

Decommissioning

9.1)

Storage

Do not store the test fixture without protection outdoors or in a humid environment!
 Ambient temperature -10 °C to +75 °C
 Humidity ≤ 85% (do not allow condensation to form!)
9.2)

Disposal

The text fixture's packaging material is 100% recyclable. The test fixture contains the following
materials:
 Steel
 Aluminium
 Brass
 Plastic and rubber
 Synthetic insulation material
Please bring the test fixture to a suitable collection point for recycling electrical and electron-
ic equipment, according to the country-specific regulations.
45
©
INGUN: Subject to technical changes without notice. E&OE.
Manual test fix-
ture 2xxx
15 mm
2,000 N
1.000 N
10.5 mm (below), 16 mm (above)
60 mm
+/-0.3 mm
See identification label on test fixture
and exchangeable kit
+10 °C to +60 °C
5 to 7 bar
IP3x according to IEC 60529 (protect-
ed against access with a tool)
2011/65/EU + (EU) 2015/863
English
Manual test fix-
ture 3xxx
22 mm
2,000 N
1.000 N