Temperature Set Change - AERMEC VMF-FMD Zubehörhandbuch

6

TEMPERATURE SET CHANGE

To change the room temperature set simply follow the three steps shown in the figure below:
STEP 1
Step 1: Press the button o
Step 2: With the buttons
o
Step3: Press the button or wait 10 seconds to return to the main screen.
The functioning set ranges for "Stand Alone" applications are:
Min. [°C]
17.0
12.0
For the applications with a supervision system (BMS) or a system control system (VMF), the displayed set is not an absolute value but a relative difference from the data set by
the centralised system:
Min. [°C]
-6
-3
22/10 – 5905355_00
to switch to temperature set change mode.
the room temperature set can be changed.
Max. [°C]
33.0
28.0
Max. [°C]
+6
+3
STEP 2
STEP 3
Operating mode
Cooling
Heating
Operating mode
dt
5 = 1
dt
5 = 0
17