Speed Mode - Levenhuk Ermenrich LR600 Bedienungsanleitung

Slope mode/Flagpole lock mode
The device will measure the angle of incline/decline, then calculate and display the slope-adjusted distance. In the slope mode, press
the POWER/MEASURE button. The angle, distance value, and trajectory correction will be displayed (Fig. 3a, 3b).
Flagpole lock. In the slope mode, press and hold the POWER/MEASURE button, then move the device slightly left and right until the
distance to the flagpole is locked and displayed on the LCD (Fig. 4). After locking a flagpole, the device will vibrate.
Horizontal distance mode
In horizontal distance mode, you can measure the horizontal distance between two points. You can use single measurement or
continuous measurement (Fig. 5).
Height distance mode
In height distance mode, you can measure the vertical distance between two points. You can use single measurement or continuous
measurement (Fig. 6).

Speed mode

In speed measurement mode, point the reticle at a moving target, and then press the POWER/MEASURE button. Do not let the
moving object out of your field of view in order to display the indication (Fig. 7).
Figure 3a
Figure 4
Figure 5
Figure 6
Figure 7
4
Figure 3b