Canopy; Footrest; Bumper Bar; Attach The Car Seat With Adapter (If Have) - APRAMO EXXPLORE Bedienungsanleitung

11. Canopy

1) To remove the canopy (25): Insert a thin rod into the small hole
located on the inner side that connecting canopy (25) and
frame (08), then squeeze while pulling out the canopy release
bar (26).
19
2) To attach the canopy (25): Insert the canopy (25) into the
canopy slot of frame (08) until hear "click". Repeat this
operation for the other side.
20

12. Footrest

1) Press both sides of footrest recline buttons (21) to adjust
the footrest (22).
21

13. Bumper Bar

1) To attach the bumper bar (23): press the ends of the bumper
bar (23) into the attachment points of the seat until hear "click".
Lift gently to ensure the bumper bar (23) is locked in place.
NOTE: The bumper bar should be operated when seat is
fixed, or the bumper bar can't be lifted up.
2) To detach the bumper bar (23): press the bumper bar release
button (24) and pull the bumper bar (23) away.
GB 08
19
25
26
20
25
08
21
22
21
22
22
23 23
23
23
24

14. Attach the car seat with adapter (If have)

1) Hold the car seat above the frame (08). Locate the car seat
adapter into the seat attachment slots (16) on the frame (08).
2) Ensure that the car seat "click" into place. Pull up to confirm car
seat is assembled securely.
25
3) To press the car seat release button and lift it to remove the car
seat. Repeat this operation for the other side.

15. Attach the carrycot (If have)

1) Hold the carrycot above the frame (08). Locate the carrycot
adapter into the seat attachment slots (16) on the frame (08).
2) Ensure that the carrycot "click" into place. Pull up to confirm
carrycot is assembled securely.
28
3) To press the carrycot release button and upon it to remove the
carrycot. Repeat this operation for the other side.
24
24
16
08
25
26
27
26
29
27
16
28
29
16
08
GB 09