Assembly - Partyspace CASA AFRICA LAPA OUVERT Anleitung

LAPA 4 X 6 M WITH 6 M CROSSBEAMS - MANUAL EN
13

ASSEMBLY

Step 1: Assemble the f ront and rear sides on the ground. First attach the 6 m crossbeams
no. 5 to the 240 cm poles no. 2 and 3 using the 12 x 180 bolts to the narrowest side of the 6 m
crossbeams and, using the 12 x 200 bolts to the centre of the thickest sides. Pre-drill guide
holes in the elements.
Now check that the poles are perpendicular to each other and attach the 80 cm struts to the
poles and to the top of the cross beams using the 8 x 100 mm construction screws.
Step 2: Place the 2 sides in a vertical position, with a distance of 370 cm between them.