Assembly - Partyspace Casa Africa LAPA Anleitung

LAPA 3 X 3 M & 4 X 3 M - MANUAL EN
13

ASSEMBLY

Step 1: Assemble the two load-bearing sides
on the ground. First attach the 260 cm to
the two 240 cm poles using the 8 x 160 mm
construction screws supplied. Pre-drill holes in
the elements to guide the screws.
Now check that the poles are perpendicular to
each other and attach the 80 cm struts to the
poles and to the top of the cross beams using
the 8 x 100 mm construction screws.
Step 2: Place the two load-bearing sides in
a vertical position (with a distance between
them of 267 cm for the Lapa 3 x 3 m and 367
cm for the Lapa 4 x 3 m).
Now attach the beams (300 cm for the Lapa
3 x 3 m and 400 cm for the Lapa 4 x 3 m) to
the poles using the 8 x 160 mm construction
screws. Pre-drill holes in the elements to guide
the screws.