Product Disposal; Removing Battery - Zelmer ZMB6000 Benutzerhandbuch

Ensure that the device is unplugged prior to cleaning it.
This device may only be cleaned with a damp cloth, and chemical products
must never be used for the same.

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/EU on
electrical and electronic devices, known as WEEE (Waste Electrical
and Electronic Equipment), provides the legal framework applicable
in the European Union for the disposal and reuse of waste
electronic and electrical devices. Do not dispose of this product in
the bin, instead going to the electrical and electronic waste
collection center closest to your home.
The product may contain batteries. Remove them before disposing
of the product and dispose in special containers approved for this
purpose.

REMOVING BATTERY

The appliance must be disconnected from
the supply mains when removing the
battery
Ensure that the clipper is discharged of all power First remove the comb.
Then remove the blade.
Unscrew the 2 screws in the blade base of the unit. Unscrew the other screw
on the lower back housing of the clipper. Lift or pry the clipper halves apart,
exposing the battery.
Cut the metal pieces on both ends of the battery and remove it from the PCB.
Pull downward the battery set from the unit.
The battery must be removed from the
appliance before it is scrapped. The
battery is to be disposed of safety.
We hope that you will be satisfied with this product.
EN