OPERATION
Starting/stopping
Grasp the brushless electric pressure washer by the handle (3)
with one hand while balancing the front of the tool with the other
hand.
Using your thumb, press the locking switch (1) upwards and
then press the cleaning switch (2). Release the locking switch.
To stop the brushless electric pressure washer, release the
trigger switch (2).
Swivel nozzle adjustment
The 5-position swivel nozzle can be rotated to select 1 of the 5
spray angles (1).
Select your setting by aligning the desired spray angle with the
arrow printed on the back of the nozzle.
SEE THE LIST OF RECOMMENDED SETTINGS FOR VA-
RIOUS CLEANING APPLICATIONS.
Setting 1
0 0 ° ° : This position provides the narrowest degree of spray. Should only be
used in areas that can withstand high pressure, such as metal or concrete.
Setting 2
1 1 5 5 ° ° : This position is used for heavy cleaning or stripping of small areas and
surface preparation, such as removal of dirt, mildew or paint. This position
should only be used on areas and materials that can withstand high pressure.
Setting 3
0 0 ° ° + + :
This position suitable for more gentle showers, great for watering
flowers.
Setting 4
4 4 0 0 ° ° :
This nozzle delivers the widest degree spray pattern. Can cover a wide
area and can be used for most general cleaning jobs
Setting 5
4 4 0 0 ° ° + + :
This nozzle delivers a 40-degree spray pattern and a less powerful
stream of water. Can be used for most general cleaning jobs.
WARNING! To avoid injury and damage, be sure to use the
correct nozzle for the job. To minimise surface damage, always
use the lowest pressure nozzle. If a stronger stream is required,
adjust the distance first and then change the nozzle setting.
PRESSURE ADJUSTMENT
•
To select the desired pressure, press the button and the
indicator will change colour according to the selected
setting.
Red is the highest setting (highest speed/pressure/flow).
•
Press again and the indicator will change to green, which
•
is the normal setting (lowest speed/ pressure/flow).
1
3
2
MAINTENANCE
WARNING!
When performing maintenance, use only identical spare
•
parts. The use of any other parts may create a hazard or
cause damage to the product.
Always wear safety goggles or safety glasses with side
•
shields when operating the power tool or blowing dust. If
the operation is dusty, also wear a dust mask.
To avoid serious personal injury, always remove the
•
battery from the product when cleaning or performing any
maintenance.
Avoid using solvents when cleaning plastic parts. Most
•
plastics are susceptible to damage from various types of
commercial solvents and can be damaged by their use.
Use clean clothes to remove dirt, dust, oil, grease, etc.
•
Never allow brake fluids, gasoline, petroleum-based
•
products and penetrating oils to come into contact with
plastic parts. The chemicals can damage, weaken or
destroy the plastic, which can cause serious personal
injury.
STORAGE
Clean the pressure washer.
•
Store the equipment in a place inaccessible to children.
•
Keep the product away from corrosive agents such as
•
garden chemicals and de-icing salts.
TOOL'S PARTS
1. 5 position rotating nozzle
2. Quick-connect nozzle coupling
3. Wand
4. Pressure indicator
5. Pressure selector switch
6. Lock switch
7. Hose quick connect adapter
8. Trigger switch
9. Battery socket
TECHNICAL SPECIFICATIONS
Voltage
Rated pressure
Max pressure
Min pressure
Nominal flow rate
Maximum flow rate
Minimum flow rate
Weight
Spray modes
· 8 ·
20V
355PSI (24,5 Bar)
3
507PSI (25 Bar)
319PSI (22 Bar)
2.2l/min
2.4l/min
2.0l/min
2 kg (without battery pack)
5 modes
REF. 60039