elysia xpressor neo Bedienungsanleitung Seite 5

Warm Mode: The xpressor neo offers a second switchable sound
flavor by altering its frequency spectrum, harmonics and transient
response. (p. 10)
Log Release (Log Rel): This alternative release curve follows a
logarithmic course instead of the standard linear progress and results in
a very gentle kind of compression. (p. 9)
Auto Fast: A semi-automation. This function shortens the attack time
automatically on fast and loud signal impulses and then returns to the
value set with the controller. (p. 8)
GRL LED: Indicates Gain Reduction Limiter activity. If this LED is on,
incoming signals will be held at the GR limit instead of being compressed
any further. (p. 12)
Gain Reduction Meter: The display for the gain reduction process.
Shows the amount of compression measured in dB as an visual support
for the acoustic events.
Sidechain Filter (SCF): A tunable low cut filter in the sidechain of the
xpressor neo avoids overcompression and pumping when there is a lot
of low end energy in the mix.
Gain Reduction Limiter (GRL): Restricts the control voltage. This
innovative limiter is not placed in the audio path as usual, but in the
control circuit of the compressor. (p. 12)
Gain: The make-up gain of the xpressor neo. This controller
compensates for the loss in gain caused by the compression process.
Mix: The direct and the compressed signal can be blended in any
desired relation by simply turning the mix controller. Onboard parallel
compression!
5