Brake Adjustment - FF Europe RLT01 Original Aufbauanleitung

EN

BRAKE ADJUSTMENT

Your Rollator brake system will require periodic adjustment.
To adjust the brakes loosen Nut B and then screw/unscrew Nut
A. When adjusted re-tighten Nut B. If further adjustment is
required then loosen the Locking Screw and then using a pair
of pliers pull the cable down by approximately a millimetre.
Re-tighten Locking Screw. The brakes can then be adjusted
further by loosening Nut B and screwing/unscrewing Nut A as
before（Figure 9）
Figure 9
15