Assembly Procedure - FF Europe RLT01 Original Aufbauanleitung

Figure 1
Figure 2
Figure 3
Figure 4
EN

ASSEMBLY PROCEDURE

Step 1:
Press the red button to detach the front wheel, the
red button is located on top of the wheel. Repeat on
the other wheel.
To assemble the front wheel, push the front wheel
into the receptacle place, the front wheel is fully
fastened when you hear the click sound.(Figure 1)
Step 2:
Unfolding rear wheel: Press the button on both sides
and pull up, then move the rear wheel pole
downward until reset on the next button position.
Repeat for the second rear wheel.
Folding rear wheel: Press the button on both sides
and pull up, then move the rear wheel pole upward
until reset on the next button position. Repeat for
the second rear wheel.
Step 3:
Attach the handles by pressing the locking pin on the
base of the handle assembly and sliding into the
receptacle on the main frame. Repeat on the other
side. (Figure 3)
Step 4:
Attach the bag to the hook of the seat frame. The
shopping bag can be detached easily when using.
(Figure 4)
13