Inhaltsverzeichnis
Werbung
LED Indicator
LED Indicator(RX Mode)
Wait for bluetooth pairing
Standby RX reconnection status
Transmission play music CODEC
How to Use
1. Pairing
1) Set the
WISEQ 019
2) Turn on the
WISEQ 019
Button for 3 seconds. Rapidly tap the Multifunction Bu tton t wice
to enter pairing mode with the LED indicator flashes blue and red
alternately.
3)Act ivate the B luetooth f unction on your t ransmitting device and
find " WISEQ 019" to connect. The
solid blue after successfully paired.
4) Connect the
device thro ugh a 3. 5mm au dio or SPDIF OUT port to en joy the
music.
Note:
a. If a PIN code is required for pairing, try 0000, 8888, 1111 or 1234.
b. This product has no built-in microphone which cannot be used for
hands-free calls.
c.
WISEQ 019
can remember 8 paired devices, when the number of paired
devices exceeds 8, the first one will be replaced.
2. Pair with two devices at the same time
In RX m ode,
WISEQ 019
smartphones/tablets at the s ame time. Only one device can play
music at any time. You have to stop the music on one device to play
on the other. Please follow the instructions below:
1)Follow the previous instructions in the "Pairing" section to pair the
WISEQ 019
on your first device after successfully pairing
2) Rapidly tap the
connect to your second device
to RX mode before turning it on.
by pressing and holding the Multifunction
WISEQ 019
to your headphone or home stereo playback
able to pair with two Bluet ooth ena bled
with y our f irst device. Disable the B luetooth f unction
WISEQ 019
Status
The red and blue lights flash alternately
The blue light flashes twice per second
Blue LED light,
aptx HD flashes 4 times every 5 seconds,
aptx LL flashes 3 times every 5 seconds,
aptx flashes 2 times every 5 seconds,
SBC flashes 1 time every 5 seconds
AAC flashes 5 time every 5 seconds
WISEQ 019
Multifunction Bu tton t wice to pair and
LE D indicator will turn
WISEQ 019
with it.
6
Werbung
Inhaltsverzeichnis
