EFOY CC1 Bedienungsanleitung Seite 11

4. Operation 4. Operation 4. Operation 4. Operation
Automatic
Charging mode
Automatic
Standby
A "P" (Parallel) will appear on the first line of the other
devices' displays on the right. The devices will switch
to charging mode after a three-minute delay in order
P
to prevent the voltage from dropping too radically
should the battery be very low. "Charging" will likewise
appear on the second line of the displays.
Once the battery is fully charged, all devices will
switch back to the monitoring mode. The "P" will
disappear from the upper-right corner of all remote
controls. "Automatic" and "Standby" will continue to
appear on the first and second lines respectively.
Should you wish to charge the battery manually now
and then, you can do so by using the "on/off" switch to
switch the device "On". All the other devices will
automatically turn on. The battery will now charge
until the switch off threshold is reached, after which
all devices will switch back to automatic mode.
During operation, should an error message appear on
a device (e.g. empty fuel cartridge), the device will
remain in error mode. All other devices will continue
to charge the battery. Once the error has been
corrected, pressing the "Reset" button will return the
device to parallel operation.
The antifreeze mode will likewise continue. There is
no parallel operation here, i.e., every device switches
to antifreeze mode independently of the others
whenever necessary.
All of the functions described in the EFOY Pro user's
manual will also function in parallel operation.
11