Charging The Device - Rebblo Rb-Pc-Msg01-B Bedienungsanleitung

PARTS & FEATURES OF THE DEVICE
A. Massage heads (4 pcs)
A1. Round massage head
A2. Flat massage head
A3. Bullet massage head
A4. Fork massage head
B. Massage head holder
C. LED indicator
D. Power button
E. Charging port
F. Handle
G. Charging cable
A
B
G
A A

CHARGING THE DEVICE

• Make sure the device is turned off.
• Carefully plug the connector of the charging
cable (G) into the charging port (E).
• Plug the USB connector of the charging
cable (G) into the USB port of your USB
charger.
• The LED indicator (C) flashes when the
device is charging.
• Once charging is complete, all the LED
C
D
E
F
A A
indicator lights (C) will light up and the
device will automatically stop charging.
• Unplug the charging cable from the device,
which is now ready for use.
• To check the battery level, press the power
button (D) once when the device is powered
off and the LED indicator (C) will light up.
• The charging LED indicator (C) has 6 lights.
Each light represents 1/6 of the battery.
• If the battery level is low, only the first light of
the charging LED indicator (C) will light up,
indicating the battery needs to be recharged.
INSTALLING THE MASSAGE HEAD
To use the device, it must be fitted with a
massage head. Different muscle groups require
different care. Select the desired massage head.
• Massage heads (A1) & (A2) are suitable for
large muscle groups and body parts.
• Massage head (A3) is suitable for precise
pain points.
• Massage head (A4) is suitable for specific
muscle groups such as next to the neck,
spine, waist and Achilles tendon.
Push the selected massage head (A1), (A2),
(A3) or (A4) on the massage head holder (B).
To change or remove the massage head, make
sure the device is powered OFF and gently pull the
massage head off the massage head holder (B).
Note! Never use the device without a massage
head attached.
USING THE DEVICE
Before use make sure you follow and respect
the instructions as described in "Important
information, follow these instructions".
Power on the device by pressing the power
button (D) for ± 3 seconds. Once the device is
EN 5