Wellell Optima Auto Gebrauchsanleitung Seite 14

Optima Auto Series / English
(4). After initial inflation, the system sets off to detect the patient's weight in order to provide
corresponding pressures for better mattress pressure relieving performance.
NOTE- Place the patient on the mattress ONLY after the initial inflation is completed, better
when the auto adjustment is about to start.
NOTE- Once the patient is on the mattress, the pump will automatically sense and adjust the
pressure in the cells to support the patient.
NOTE- Press the knob for at least 3 seconds to quickly initiate the auto adjustment process.
(5). The current therapy mode is shown the LCD display. Turn the knob clockwisely or counter-
clockwisely to change settings. Press the knob when your prefer selection is hightlighted to enter or
confirm the setting.
Mode
A. Mode
Alternating
NOTE- Review the patient's monitoring and reposition program before you change the
operation mode.
B. Cycle time
The 5 blue bars displayed on the screen represents the status of the
automatic adjustment detection. When completes, the 5 bars will
stop running and become
Cycle time
Continuous Low Pressure
.
Tuning
Back to previous page
11