Toro Tempus Air BS Base Station Bedienungsanleitung Seite 7

Step 3
PARING MODULES
If you have powered Tempus Air BS gateway on solar panel, to associate LoRa
be switched to pairing mode.
Example of a radio association between an
You must first have associated your Tempus Air module with your account in MyToroTempus application before proceeding with the association of the module on
your Tempus Air BS gateway. Refer to the user manual to associate it and then perform the following steps.
1. Select the product in the list of
modules. .(Remember that you must
be connected to your module via
Bluetooth).
4. Push on Transmit to
validate the operation.
Tempus Air module and the Tempus Air BS:
Push on on the top right of the screen
to access to information of the products.
Tempus Air CT
(Example with a )
TM
modules such as Tempus Air CT / MS / MV / PS to the Tempus Air BS gateway, it must
2. Push on
« Remote access »
Toro Tempus Air BS
3. Select your Tempus Air BS (Refer
to the «Default name» present on
its product label)
5. Your Tempus Air BS is now
associated. (Push red button to test it)
7